The Tool Master 5 is the top of the range in the PWB tool master group of pre-setters, it
has a range up to 600mm diameter and 900mm tool length.
|
Rapid positioning with the aid of a single joystick giving step less
speed of 0.1 to 30 mm/sec.
Moving tool carrier is supported on preloaded needle guides.
- TM5-P 20x Projector version.
- TM5-EPRO image processing version.
PDF
Brochure |
 |
There are various tool holders available, see the options
page, ISO 40 or ISO 50 needle bearing pictured here gives 0.002 mm run out
accuracy. |
|
| The Swiss made projector has a diameter of 150 mm and a
magnification of 20x. It has stationary and rotating graticule, tangential
reference radii and 2 x 180' angular marking with vernier scale.
|
|
|
This compact, simple to use readout is packed with features, please
follow the link to read the full specification.
|
|
|
TM5-EPRO Image Processing.
The addition of the EPRO vision system brings the largest of the Tool
master range of gauges into its element. With automatic edge recognition
and up to 5 integrated DNC post processors there is very little this
controller can's do.
See the EPRO
page for full specification. |
|
|
Spindle KV,
Tool adapter available for ISO 40 or ISO 50 Accessories:
- Pneumatic clamping insert for HSK-tools
- 4 x 90° indexing for turning tools with VDI shaft
- All ISO 40 and 50 standard reduction sleeves can be used.
|
 |
|
Pneumatically actuated clamping insert for
HSK-tools.
- Precision tool adaptor with vacuum pull-in Tool adaptor with vacuum
pull-in
- High run out accuracy through pre-loaded precision balls.
- Tools can be rotated and clamped in any position.
- This facilitates the presetting of fine boring head tool tips.
- Soft-key pad operation of all pneumatic functions.
|
 |
