Tool Boy Fixtures

The TOOL BOY is a unique tool mounting device for the assembling and disassembling of cutting tools on tool holders and modular tools. The head can be rotated 360 degrees, allowing convenient access for all operations in one set-up. The clamping can be forced down, rather than horizontally, allowing the TOOL BOY to be installed on tool carts. The head are secured in the horizontal position for locking the tool, which means that substantially less force is required to achieve optimum torque transmission. With the TOOL BOY, you eliminate damage to your machine spindles - advantages which pay off very quickly!

Tool Boy strip down fixtures

TOOL BOY mounted on tool cart			Vertical head position (tool side up) Install desired tool holder and clamp securely Insert appropriate tools
Horizontal head position (left or right) lock or unlock tools			Vertical head position (tool side down) Install retention knob and lock securely

	Basic unit TOOLBOY modular suitable for all tool systems Mounting on table or tool cart Rigid interface between basic unit and tool holder Art. Nr. 400500 Bracket for 2 tool holders for table and wall mounting Art. Nr. 400510
		size	Part No.
	DIN 69871 / DIN 2080 JIS 6339 (MAS-BT) ANSI -CAT-V-Flange	SK/ISO 30 SK/ISO 35 SK/ISO 40 SK/ISO 45 SK/ISO 50	400520 400524 400521 400525 400522
	DIN 69893 HSK - Form A	HSK-A32 HSK-A40 HSK-A50 HSK-A63 HSK-A80 HSK-A100	400544 400545 400540 400541 400542 400543
	DIN 69880 VDI 3425	VDI 20 VDI 25 VDI 30 VDI 40 VDI 50	400580 400585 400581 400582 400583
	KENNAMETAL Widia/Tizit	KM 32 KM 40 KM 50 KM 63	400553 400550 400551 400552
New	SANDVIK Capto	Capto C3 Capto C4 Capto C5 Capto C6 Capto C8	400135 400136 400137 400138 400139

Requires minimal space on workbench 140 x 100 mm

4 x 90 degree indexable

High degree of user safety

Optimum position for all manipulations on tooling

Prevents tools from injuring hands
No spine torsion thanks to horizontal tool position (e.g. tightening of milling cutter screws)
Reduced energy level due to optimum ergonomics
Safe tool handling - even of heavy tools - thanks to automatic locking in desired working position
Optimum protection of ground tool shafts thanks to brass taper sleeve
Improved tool clamping ensures longer tool life and protects machine spindle
No need to re-clamp tools to perform different tasks
No wear as major elements such as clamping dog and locking disc are hard anodised
Available for ISO / HSK / KM tapers VDI turning tool and now Sandvik Capto among others
Subject to technical modifications

Down load a PDF brochure of the Tool Boy Range of tool fixtures.